ChockDesign® Mounting Plate
The installation of resilient mounts can be challenging. The rubber mount's base plate must be aligned perfectly parallel to the machine foot to ensure optimal vibration damping.
The traditional way to set up the resilient mount is to use the four adjustment bolts to eliminate any angle between the cap and the base plate and then to fill the gap between the base plate of the mount and the foundation with two-component epoxy resin or a tailor-made steel-fitted block.
The ChockDesign® Mounting Plate offers an economical alternative to epoxy resin or tailor-made steel-fitted blocks. The adjustment bolts in the ChockDesign® Mounting Plate are used to eliminate any angle between the mount's foundation and base plate. Now the four ChockDesign® at the corners are adjusted to fill the gap. The base plate, ChockDesign® Mounting Plate, and machine foundation are then tightened together securely with four foundation bolts.
The mounting system can be readjusted at any time if required. Just loosen the foundation bolts and adjust the ChockDesign® Mounting Plate to meet your target alignment. The time needed to finish a typical resiliently mounted machine can be cut back from several days to only a few hours.
The ChockDesign® Mounting PLate has the following design features:
- Spherical top ring for angular difference up to 2° between the machine foot and the foundation.
- Tool groove and holes to aid installation with a wide range of tools.
- Buttress thread design for maximum strength and stiffness.
- Standard ACE finish: Anti-Corrosion Enhanced for cost-effective corrosion protection.
- The footprint is large and reduces surface pressure.
- Type Approved by all major classification societies.
The standard ChockDesign® Mounting Plate is manufactured from S355 (DIN1.0570) and is Anti-Corrosion Enhanced for cost-effective corrosion protection.
Ask us a question
All business conducted by Chock-Design B.V. — including but not limited to quotations, order confirmations, purchase orders, deliveries, and services — is exclusively governed by the Orgalime General Conditions [S2012]. These conditions supersede any other general terms and conditions. A copy of these conditions is available upon request or can be accessed here.
Follow us
